glazing In addition to standard glazing, we also offer safety glazing. Safety glass is used in situations where there is a risk of falling through. Legislation requires the use of safety glass, these obligations are described in NEN 3569 and NEN 6702. Because we cannot assess the situation in which the frame is placed, we are not responsible for whether or not safety glass is used.

HR++ glass HR++ gives a high efficiency. The construction of the glazing is always from the outside to the inside, in this case 4mm glass on the outside, a cavity of 16 mm and the glass on the inside is 4mm . This structure guarantees a U-value of 1.1.

Safety glass 1-sided laminated HR++ With 1-sided laminated glass, the inside of the double glass consists of two 3 mm glass plates that are stuck together with a transparent foil in between. When laminated glass is broken, it will not give up easily thanks to the high adhesion factor of the film. This glazing is used as fall-resistant glazing, for example on a floor where the glass runs to the floor and you have a chance of falling outside. This structure guarantees a U-value of 1.1. 

Safety glass 2-sided laminated HR++  With 2-sided laminated glass, both the inside and the outside consist of two panes of 3mm that are stuck together with a foil in between. If the NEN3569 applies to your work, you can use this layered injury-reducing glazing, it has not been tested for falling through. We recommend using this glass in doors and sliding doors, for example, because there is a chance that you can fall against it from both the inside and the outside. This structure guarantees a U-value of 1.1.

HR+++ glass 
HR+++ glazing has a high efficiency. Glazing is built from the outside in, in this case 4mm glass on the outside, a cavity of 18mm, 4mm glass in the middle and then another cavity of 18mm. The glass on the inside is 4mm. This structure guarantees a U-value of 0.6.

Safety glass 1-sided laminated HR+++ 
With 1-sided laminated glass, the inside of the triple glass consists of two 3 mm glass plates that are stuck together with a transparent foil in between. If the laminated glass breaks, it will not give up easily thanks to the high adhesion factor of the film. This fall-through-resistant glazing is used on a floor where the glass extends to the floor and there is a chance of falling out. The safety glass guarantees a U-value of 0.6.

Safety glass 2-sided laminated HR+++ 
The 2-sided laminated triple glass has a transparent foil between the two panes of 3 mm on both the inside and outside. You can use this layered injury-reducing glazing if NEN 3569 applies to your work. This glazing has not been tested for fall through. We recommend using this glass in doors and sliding doors, for example. The chance is there because you can fall against it from both the inside and the outside. The triple 2-sided laminated glass guarantees a U-value of 0.6.

HR++ frosted glass
HR++ frosted glass has the same technical properties as transparent laminated HR++ glass. Satin glass is used to create the matte appearance. The coating of the glass is on the inner pane. As a result, the outer pane is finished with a satin foil.

HR++ 1-sided laminated frosted glass
With 1-sided laminated HR++ frosted glass, the inside of the double glass consists of two 3mm glass plates that are stuck together with a transparent foil in between. When the laminated glass is broken, it will not easily shatter. This glazing is used as fall-resistant glazing, for example on a floor where the glass extends to the floor and you have a chance of falling outside. The outer pane is finished with a satin foil.

HR+++ frosted glass
HR+++ frosted glass has the same technical properties as transparent laminated HR+++ glass. Satin glass is used to create the matte appearance. The coating of the glass is on the inner and outer pane. As a result, the middle pane is finished with a satin foil.

HR+++ 1-sided laminated frosted glass
With 1-sided laminated HR+++ frosted glass, the inside of the double glass consists of two 3mm glass plates that are stuck together with a transparent foil in between. When the laminated glass is broken, it will not easily shatter. This glazing is used as fall-resistant glazing, for example on a floor where the glass extends to the floor and you have a chance of falling outside. The outer and inner panes are both coated, so the middle pane is finished with a satin foil.

Need help choosing the right glass for your plastic frame?
If you are unsure about the choice of glass, please do not hesitate to contact us. The Supply Online team is happy to help you with all your questions.